set-eth

Use the interface to configure Ethernet network.

HTTP Request

GET http://ip/usapi?method=set-eth&is-dhcp=1&ip=10.10.107.212&mask=255.255.0.0&router=10.10.0.1&dns=10.0.0.3
Parameter Description
method set-eth
is-dhcp Indicates whether to obtain an IP address from the DHCP server.
0 indicates to set IP address manually.
1 indicates to obtain an IP address from the DHCP server dynamically.
ip Indicates Ethernet IP address.
mask Indicates the subnet mask.
router Indicates the gateway.
dns Indicates DNS server.

Response Body

{
  "result": 0
}
Item Description
result 0 indicates that the request was accepted successfully. Refer to API Status Codes to find specific description for other values.

results matching ""

    No results matching ""

    results matching ""

      No results matching ""