Connect the devices

1. Align the plug connectors (CABLINE-VS connector) with the receptacle connectors on the Eco Capture HDMI 4K Plus M.2 and HDMI adapter and insert them parallel into the receptacle connectors .

   

   Caution: Please don't use PULL BAR for insertion of connector. There are possibilities to cause PULL BAR deformation or the rotation axis dropping out from the connector. 
2. Turn the PULL BAR to the receptacle connector side and lock it. 

   

3. The devices are connected.

   

Un-mate the connector

1.  Lift the PULL BAR and release the lock with the receptacle connector. Then turn the  PULL BAR to parallel to the PCB.

   

2. Pull the connector out horizontally in parallel to PCB.

   

   Caution: Please don't use PULL BAR for un-mating the connector. There are possibilities to cause PULL BAR deformation or the rotation axis dropping out from the connector.