Knowledge Base Usb Fusion Content

How to log in to the Web UI

Article ID: 007020010 USB Fusion

Using the USB Network IP address

  1. Make sure that USB Fusion has connected to power.
  2. Connect a USB cable from the USB OUT port of USB Fusion to a computer.

    The cable connection will establish a network connection between your computer and USB Fusion through the USB cable.

  3. Open a browser on the computer, enter the static IP address for USB network, and press Enter.

    The default address for USB network is 192.168.66.1.

  4. Enter the user name and password to log in.

    Default user name/password: Admin/Admin

Using Windows Network Discovery

  1. Ensure that USB Fusion has connected to power.
  2. Connect your computer and USB Fusion to the same network through Wi-Fi or Ethernet, or connect them with the supplied USB cable.

    Since Wi-Fi connection is set up on the Web UI, you cannot use Wi-Fi for the first access to the Web UI.

  3. On the computer, open File Explorer. You can:

    • Click the Start button , and select File Explorer in the start menu.
    • Hold down the key and press E on your keyboard.
  4. At the left panel of File explorer, click Network.

    If network discovery is disabled, you need to first enable it by referring to the following method:

    Choose > , then choose Network and Internet > Network and Sharing Center > Change advanced sharing settings. Under the current network (the one marked as current profile), click Turn on network discovery.

  5. In the Other Devices area, find your USB Fusion device based on the Device name + Serial number.

    • The default device name is USB Fusion.
    • The serial number of USB Fusion is the one that can be found on the device, for example A506211128001.
  6. Double-click the device icon to access the web UI login page.

  7. Enter the user name and password to log in.

    Default user name/password: Admin/Admin

Using an Ethernet/Wi-Fi IP Address

When you have obtained the Ethernet or Wi-Fi IP address of USB Fusion, you can use the IP to access the Web UI of USB Fusion.

  1. Ensure that USB Fusion has connected to power.
  2. Connect your computer and USB Fusion to the same network through Wi-Fi or Ethernet.

  3. On the computer, open a browser, enter the IP address, and press Enter.

  4. Enter the user name and password to log in.

    Default user name/password: Admin/Admin

Has your problem been solved?