Eco Capture AIO M.2 Specifications

• HDMI 1.4a (via an accessory cable)
• SD/HD/3G SDI (via an accessory cable)

• 165MHz HDMI receiver, max input: 2048x1080 60fps 4:4:4
• Custom EDID
• Input RGB/YCbCr 4:4:4 8/10/12-bit, YCbCr 4:2:2 8/10/12-bit
• Up to 8-channel 24-bit HDMI-embedded audio at 192kHz
• HDMI interface: HDMI 1.4a

• Max input: 2048x1080 60fps 4:2:2 10bit
• Up to 8-channel 48KHz embedded audio
• Support for SMPTE ST 259 (SD-SDI), SMPTE ST 292 (HD-SDI) and SMPTE ST 424 (3G-SDI)（including the Class A, Class B-DL and Class B-DS standards）
• Input RGB 4:4:4/YCbCr 4:4:4/YCbCr 4:2:2 10/12-bit
• Input SDI signals transmitted up to 110m for 3G-SDI signals
• Support Closed Caption via SDK

• 12-bit ADC
• Support NTSC, PAL and SECAM standard
• Auto-detect input signal

• ~700MB/s per channel DMA bandwidth in PCIe 2.x system
• ~400MB/s per channel DMA bandwidth in PCIe 1.x system
• Video processing pipelines with ~180Mpixels/s processing bandwidth
• Capture videos up to 2048x1080, frame rates up to 250fps, typical resolution/frame rate include (actual capture frame rate can be limited by the PCIe bandwidth and internal working frequency.):
  • 2048x1080p60
  • 1920x1080p 23.98/24/25/29.97/30/50/59.94/60/75
  • 1280x720p 23.98/24/25/29.97/30/50/59.94/60/100/119.88/120
  • 720x576p25
  • 720x480p30
• Support for 8-bit 4:4:4 video processing
• Support for 4:2:0 8-bit capture formats including NV12, I420, YV12
• Support for 4:2:2 8-bit capture formats including YUY2, YUYV, UYVY
• Support for 4:4:4 8-bit capture formats including V308, IYU2, V408, BGR24, BGR32
• Support for RGB/YUV BT.601/YUV BT.709/YUV BT.2020
• Support video scaling, de-interlacing, color format conversion, frame rate conversion
• Output videos at 8-bit 4:4:4
• 100ns high-resolution clock based on hardware implementation
• Hardware clock synchronization across cards via SDK

Unlimited capture streams in the same format for any single input channel

• The MWCapture SDK provides functions including signal status extraction, capture configuration and real-time audio & video capture, etc
• Windows DirectShow/DirectKS/Wave API/DirectSound/WASAPI
• Linux V4L2/ALSA

• M.2 2280 Type M (PCIe Gen2 x2)

• Support for multiple cards plugged to one system
• On-board rotary switch to set card number, with 16 positions from 0 to F
• System hardware device tree will display “01: Eco Capture AIO M2” when rotary switch is set to 1, and so on.
• The video and audio device names displayed in your software will include the card number (set by the rotary switch)

• Multiple cards in one system can be upgraded simultaneously
• Cards can be upgraded without a system power shutdown (In most cases, even a reboot is not needed)
• Safe upgrade. If power off or system break down occur when the firmware is being upgraded, it will automatically restore to the initial version

• Windows 10/11/Server 2016/Server 2019/Server 2022/Server 2025 (x86 & x64) and above
• Linux x86, x64 & ARM architecture, with 2.6.35 and above

• VLC
• VirtualDub
• OBS
• XSplit
• vMix
• VidBlaster
• Wirecast
• Microsoft Media Encoder
• Any other DirectShow/V4L2/AVCaptureSession based encoding or streaming software

• M.2 Type–2280 (22 x 80 mm)

• 1 x FPC ribbon cables (Part number: 11514)
• 1 x FPC to HDMI type A adapter (Part number: 11514)
• 1 x MMCX to BNC cable

• Max current at 3.3V: ~ 0.89 A
• Max power consumption: ~ 2.94 W

• Operating temperature: 0 to 40deg C
• Storage temperature: –20 to 70 deg C
• Relative Humidity: 5% to 90% (non-condensing)