Eco Capture HDMI 4K Plus M.2 Specifications

Input Features

594MHz HDMI receiver, max input video: 4096x2160 4:4:4 60fps
Max input audio: 8-Channel, 24-bit HDMI embedded audio, 192kHz sample rate
Support input RGB/YUV 4:4:4 8-bit, YUV 4:2:2 12-bit, or RGB/YUV 4:4:4 10/12-bit signals up to 594MHz pixel clock
Support up to 8-channel IEC60958/IEC61937 audio streams via SDK
Support HDR10
HDMI input interface: LVDS 0.5PH 20-Pin to DVI-D 1.0, HDMI 2.0

~2400MB/s per channel DMA bandwidth in PCIe 3.x system
~1600MB/s per channel DMA bandwidth in PCIe 2.x system
~800MB/s per channel DMA bandwidth in PCIe 1.x system
Video processing pipelines with ~360Mpixels/s processing bandwidth
Capture videos up to 4096x2160, frame rates up to 240fps. Typical outputs include (actual capture frame rate can be limited by the PCIe bandwidth and internal working frequency.):
- 4096x2160p 5/10/15/25/29.97/30/50/60
- 3840x2160p 5/10/15/25/29.97/30/50/60
- 1920x1080p 5/10/15/25/29.97/30/50/60/120
- 1280x720p 5/10/15/25/29.97/30/50/60/120 etc.
Output NV12/I420/YUYV/UYVY/RGB24/RGB32 videos
Support custom output formats using Magewell Capture SDK
Support custom EDID, video scaling, de-interlacing, color format conversion and frame rate conversion
Support multiple replicated capture streams, and unlimited capture streams for any one input channel with the same format
Support timestamp & A/V synchronization
- Hardware based 100ns high resolution clock
- Audio frames (192 audio samples) & video frames are stamped with hardware clock
- Hardware clock can be synchronized across cards via SDK
Support firmware upgrade

The MWCapture SDK provides functions including signal status extraction, capture configuration and real-time audio & video capture, etc
Windows DirectShow/DirectKS/Wave API/DirectSound/WASAPI
Linux V4L2/ALSA

Status LEDs indicate the working state of each channel:
- Pulsing slowly: input signal unlocked
- On: input signal locked
- Double blinks: memory failed or FPGA configuration failed
- Off: firmware or power supply abnormal