Pro Convert Audio DX Specifications

document Download

Receiving/Input Features

  • Support for sample rates of 96/48/88.2/44.1 KHz, and 16/24bit sample depth
  • 1 x 2-channel 3.5mm TRS unbalanced in (5k Ohm)
  • 1 x 2-channel 4.4mm TRRRS balanced in (20k Ohm)
  • 1 x 4-channel 24-bit/48k USB Audio Class in
  • Receiving 8-channel 24-bit Dante® flows in unicast or multicast
  • Receiving 2 x 4-channel 16-bit network audio streams of SRT and/or NDI® simultaneously
  • Support for PTP master/slave (Dante)
  • Total harmonic distortion < 0.01% @ +4dBu
  • Frequency Response 20Hz ~ 20kHz (-/+0.5dB)
  • Signal to noise ratio > 100dB
  • Dynamic range > 100dB
  • Max signal level: unbalanced at 12dBu, balanced at 24dBu

Transmitting/Output Features

  • Support for sample rates of 96/48/88.2/44.1 KHz, and 16/24bit sample depth
  • 1 x 2-channel 3.5mm TRS unbalanced out (10 Ohm)
  • 1 x 2-channel 4.4mm TRRRS balanced out (150 Ohm)
  • 1 x 4-channel 24-bit/48k UAC out
  • Encoding 8-channel 24-bit Dante® flows in unicast or multicast
  • Encoding 2 x 4-channel 16-bit network audio streams of RTSP, SRT, NDI® protocols simultaneously
  • Support for PTP master/slave (Dante)
  • Total harmonic distortion < 0.01% @ +4dBu
  • Frequency Response 20Hz ~ 20kHz (-/+0.5dB)
  • Dynamic range > 100dB
  • Signal to noise ratio > 100dB
  • Max signal level: unbalanced at 12dBu, balanced at 18dBu

Configuration Management

  • Support for Dante Domain Manager and Dante Controller, providing signal routing and configuration
  • Registration with Control Hub
  • Remote control via WebUI and Control Hub
  • Provision of comprehensive information regarding the device and signals in real-time
  • Configuration of how an input is processed and codec, including volume setting, audio matrix, buffer, as well as the network connection
  • Support for updating firmware
  • Support for USB NET
  • Support for IE/Edge/Firefox/Chrome/Safari/Opera web browsers
  • Provision of HTTP APIs

Interfaces

  • 10/100/1000Mbps with PoE (IEEE 802.3af)
  • USB2.0 Type B
    • 5V/2.1A power supply
    • USB NET
  • 3.5mm TRS unbalanced IN/OUT
  • 4.4mm TRRRS balanced IN/OUT

LED Indicators

  • Power LED indications:
    • on: power on
    • off: power off
  • PTP LED indications:
    • on: synced
    • off: not synced
    • blinking: syncing

Form Factor

  • 100.9mm (L) x 60.2mm (W)x 23.3mm (H)

Accessories

  • 4.4mm to Dual XLR Male Cable
  • 4.4mm to Dual XLR Female Cable
  • USB 2.0 cable (Type A to Type B)
  • Universal power adapter
  • L bracket

On-board Control Buttons

  • 16 Position Rotary DIP Switch: set board-index from 0 to F

Screw Mounting Hole

  • ¼–20 threaded hole

Power Consumption

  • 5V max current: ~ 1 A
  • Max power consumption: ~ 5 W

Working Environment

  • Operating temperature: –10 to 50 deg C
  • Storage temperature: –20 to 70 deg C
  • Relative humidity: 5% to 90% non-condensing