Pro Convert for NDI to HDMI Module Specifications

document

Interfaces

1* RJ45 1000Mbps Ethernet port
1* USB Type-C port for configuration
1* USB Type-A 3.0 port for connecting peripherals
1* HDMI 2.0 output port
1* Modator interface for connecting to Modator 2U (hot-swappable)

Decoding Features

Decode up to 2Kp60 streams of Full NDI^® , NDI^® |HX, NDI^® |HX2, NDI^® |HX3, RTSP, HTTP, HLS, RTMP Pull/Push, MPEG-TS over UDP/SRT/RTP, TVU protocols
Decode H.264/H.265 video
Decode AAC/MP3 audio
Supports NDI^® 5.x

Output Features

Max. output: 4096x2160 60fps 4:4:4 8-bit
Deliver video at the preferred video format according to the EDID of the connected monitor. Supported output formats include:
- 4096x2160p/3840x2160p 23.98/24/25/29.97/30/50/59.94/60
- 2560x1440p 60/100
- 2560x1080p 23.98/24/25/29.97/30/50/59.94/60
- 1920x1080p 23.98/24/25/29.97/30/50/59.94/60/100/119.88/120
- 1920x1080i 50/59.94/60
- 1280x720p 23.98/24/25/29.97/30/50/59.94/60
- 720x576p50
- 720x576i50
- 720x480p59.94/60
- 720x480i59.94/60
Supports RGB, YUV444, and YUV422 signals
Supports 48KHz 8-channel audio output

Web UI

Register with Magewell Control Hub for remote centralized management
Supports configuring and managing via Web UI
Provides comprehensive information regarding the device and decoded signals in real-time
Allow to configure how a signal is decoded and output, including OSD settings, deinterlacing, resolutions, audio gain, sample rate, and channel mapping, as well as the network connection
Supports updating firmware
Supports USB RNDIS/ECM
Supports IE/Edge/Firefox/Chrome/Safari/Opera web browsers
Provides HTTP APIs

LED Indicators

Decode status indicator
- On: decoding
- Blinks: decoding error
- Off: source unselected

Physical Specifications

Form factor: 184.4mm (L) x 30.0mm (W) x 81.5mm (H)
Weight: ≈290g

Power Consumption

Max power consumption: 4.3W

Working Environment

Operating temperature: –10 to 45 deg C
Storage temperature: –20 to 70 deg C
Relative humidity: 5% to 90% non-condensing