Pro Convert SDI TX Specifications

document Download

Input Features

  • Max video input: 2048x1080 60fps. Supported resolutions include:
    • 2048x1080p/1920x1080p 23.98/24/25/29.97/30/47.95/48/50/59.94/60
    • 2048x1080i/1920x1080i 23.98/24/25/29.97/30/47.95/48/50/59.94/60
    • 1280x720p 50/59.94/60
    • 720x576 25p/50i (PAL SD)
    • 720x480 29.97p/59.94i (NTSC SD)
  • Support RGB/RGBA/YUV/YUVA signals with 10/12-bit color depth
  • Support RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
  • Support RGB, YUV BT.601/709/2020 video input
  • 16-channel SDI embedded audio inputs
  • SD/HD/3G-SDI BNC input
  • Support SD (ST 259)/HD (ST 292)/3Ga (ST 425)/3Gb (ST 425)/3Gb-DL (ST 425)/3Gb-DS (ST 425) SDI standards
  • Receive 3G-SDI transmitted up to 180m (591ft)

NDI® Encoding Features

  • Encoding Full NDI real-time stream at up to 2048x1080 60fps 4:2:2 8-bit
  • Output the same resolution as input or any custom resolution. Typical outputs include:
    • 2048x1080p/1920x1080p 23.98/24/25/29.97/30/47.95/48/50/59.94/60
    • 2048x1080i/1920x1080i 25/29.97/30/47.95/48/50/59.94/60
    • 1280x720p 50/59.94/60
  • Output frame rate same as the original, 1/2, 1/3 or 1/4 of input frame rate
  • Encoding 16-channel NDI-embedded audio
  • Support NDI 5.x

Configuration Management

  • Register with Control Hub
  • Remote control via WebUI and Control Hub
  • Provide comprehensive information regarding the device and signals in real-time
  • Allow to configure how an input is processed and encoded, including deinterlacing, up/down scaling, frame rate, aspect ratio, as well as the network connection
  • Update firmware
  • Support USB RNDIS/ECM
  • Support IE/Edge/Firefox/Chrome/Safari/Opera web browsers
  • Provide HTTP APIs

On-board Control Buttons

  • 16 Position Rotary DIP Switch: set board-index from 0 to F

PTZ Control

  • Control PTZ cameras using protocols of VISCA, Visca UDP, Visca UDP2rs232, PELCO-P and PELCO-D via NDI
  • Mini-DIN–8 jack (shared with Tally light)

Network Interfaces

  • 10/100/1000Mbps Ethernet
  • IEEE 802.3af PoE

USB Interface

  • USB2.0 Type B
    • 5V/2.1A power supply
    • USB RNDIS/ECM

Supported Products

  • NDI Studio Monitor
  • OBS
  • vMix
  • Any other NDI-enabled product

LED Indicators

  • Status LEDs indicate:
    • Power supply: on/off
    • Input signal: locked/unlocked

Form Factor

  • 100.9mm (L) x 60.2mm (W) x 23.3mm (H)

Accessories

  • USB 2.0 A to B cable
  • 5V/2.1A power adaptor
  • Mini-DIN 8 breakout cable
  • Tally light
  • L-bracket

Screw Mounting Hole

  • ¼–20 threaded hole

Power Consumption

  • 5V max current: ~1.5A
  • Max power consumption: ~7W

Working Environment

  • Operating temperature: 0 to 40 deg C
  • Storage temperature: –20 to 70 deg C
  • Relative humidity: 5% to 90% non-condensing