get-def-video-config

Use the interface to retrieve the default video settings.

HTTP Request

GET http://ip/mwapi?method=get-def-video-config
Parameter Description
method get-def-video-config

Response Body

{
 "status": 0,
  "show-title": false,
  "show-tally": false,
  "show-vu-meter": true,
  "vu-meter-mode": "none",
  "show-center-cross": false,
  "safe-area-mode": "none",
  "ident-mode": "none",
  "ident-text": "",
  "h-flip": false,
  "v-flip": false,
  "switch-mode": "blank",
  "deinterlace-mode": "bob",
  "in-auto-color-fmt": true,
  "in-color-fmt": "bt.709"
}
Name Description
status 0 indicates that the request was accepted successfully. Refer to API Status Codes to find specific description for other values.
show-title True indicates to overlay the name and resolution of the video source on the output, otherwise it is false.
show-tally True indicates to overlay the Tally light status of selected NDI source stream on the output, otherwise it is false.
show-vu-meter True indicates to overlay the VU meter, a volume bar, on the output, otherwise it is false.
vu-meter-mode Shows the measurement of the volume, including none, dbu, dbvu, dbfs, if audio gain is set, the post-gain-dbu, post-gain-dbvu, and post-gain-dbfs will show the gain effect.
show-center-cross True indicates to overlay a center cross on the output, otherwise it is false.
safe-area-mode Shows the safe area mode including none, 4:3, 80%, and square.
ident-mode Indicates to show or hide the device name or ident text that overlays the output, including none, ident-text, device-name.
ident-text Shows the digital label text overlaid on the output.
The label text ranges from 1 to 32 characters which contains A to Z, a to z, 0 to 9, and special characters including spaces, dash(_), minus(-) and plus(+) sign.
h-flip True indicates to set a mirror effect for the video, otherwise it is false.
v-flip True indicates to reverse the active image vertically, otherwise it is false.
switch-mode Shows the image, either Black screen(blank) or the last picture of the previous video(keep-last), when the NDI source is changed.
deinterlace-mode Shows the mode to convert interlaced video into a progressive form including bob, weave.
in-auto-color-fmt True indicates to auto-set color space, which means the color space will be BT.601 for SD sources and BT.709 for HD sources, otherwise it is false.
in-color-fmt Shows the color space including bt.601 and bt.709.

results matching ""

    No results matching ""

    results matching ""

      No results matching ""