get-eth-status
Use the interface to obtain the ethernet status with administrative rights.
HTTP Request
GET http://ip/mwapi?method=get-eth-status
| Parameter |
Description |
| method |
get-eth-status |
Response Body
{
"status": 0,
"use-dhcp": true,
"device-name": "Pro Convert",
"state": "1000m",
"mac-addr": "70:B3:D5:75:D2:41",
"ip-addr": "192.168.1.90",
"ip-mask": "255.255.255.0",
"gw-addr": "192.168.1.1",
"dns-addr": "10.0.0.3",
"tx-speed-kbps": 0,
"rx-speed-kbps": 5
}
| Name |
Description |
| status |
0 indicates that the request was accepted successfully. Refer to API Status Codes to find specific description for other values. |
| use-dhcp |
Indicates whether to use DHCP to obtain IP address. If yes, it shows true; otherwise, it is false. |
| device-name |
Indicates the device name. |
| state |
Indicates Ethernet network connection status and the bandwidth speed, including down, disconnected, 10m, 100m, 1000m, 2500m, 5000m, 10000m. |
| mac-addr |
Shows the MAC address. |
| ip-addr |
Shows the IP address. |
| ip-mask |
Shows the subnet mask address. |
| gw-addr |
Shows the gateway address. |
| dns-addr |
Shows the DNS server address. |
| tx-speed-kbps |
Shows the Ethernet send speed in Kbps. |
| rx-speed-kbps |
Shows the Ethernet receive speed in Kbps. |