LeftArrow Knowledge Base

Use USB Capture Utility V3 to edit EDID

Article ID: 002030016 Last Update: 2018-06-11

Applies to: USB Capture HDMI Gen 2 , USB Capture AIO , USB Capture HDMI Plus , USB Capture DVI Plus , USB Capture HDMI 4K Plus

Use USB Capture Utility V3 modify EDID

  1. In the HDMI tab page of USB Capture Utility V3, click Timing to open the EDID Detailed Timing dialog box.
  2. In the EDID Detailed Timing dialog box, select a timing format in the Mode list, and then set the following parameters:
    • Horizontal Active: horizontal pixels of the resolution
    • Vertical Active: vertical pixels of the resolution
    • Vertical Scan Frame Rate: frame rate
The EDID Detailed Timing dialog box of USB Capture Utility V3

Use a third-party editor to modify EDID

In the HDMI tab page of USB Capture Utility V3,

  1. click Export under EDID to save the original EDID to the local;
  2. use a third-party editor to modify EDID;
  3. click Import to import the custom EDID into the capture device;
  4. clear the SmartEDID check box.
The HDMI tab page of USB Capture Utility V3

Feedback

Has your problem been solved?