Welcome to knowledge base

How to configure Pro Convert via Web UI

Pro Convert allows you to set up and control it via a web-based user interface as an administrator account or a general user. You can get access to the Web UI using either NDI® Studio Monitor or USB RNDIS. Make sure that at least one of the following web browsers is equipped in your system. Microsoft Internet Explorer 11 Microsoft Edge Mozilla Firefox version 61 and above Google Chrome version 49 and above Apple Safari 11.1 and above Opera 55.0.2994.44 and above Method Ⅰ: Using USB RNDIS to configure Pro Convert For Mac users who are connecting via USB RNDIS for the first time, please download and install a RNDIS driver (like HoRNDIS) before connecting the USB cable. Connect your converter to your computer via a USB cable. Run your web browser, and type in USB RNDIS address to access the Web UI. The default address is http://192.168.66.1. Enter your account and password in the SIGN IN page, and configure the device after you login successfully. The default administrator account and password (case-sensitive) are as follows. Username: Admin Password: Admin Method Ⅱ: Using File Explorer to configure Pro Convert (For Windows) Open a File Explorer window. Select the Network, and turn on the network discovery function if a prompt window appears. Find your Pro Convert device in the Other Device section, where the detected device will be shown as "Pro Convert + #board index + (serial number)". Double click the converter icon to open the Web UI in your web browser. Enter your account and password in the SIGN IN page. The default administrator account and password (case-sensitive) are as follows. Username: Admin Password: Admin Method Ⅲ: Using NDI® Studio Monitor to configure Pro Convert From a computer in the same LAN, download and install Studio Monitor from NewTek official site https://www.newtek.com/ndi/tools for free. Launch Studio Monitor in your system. Click the Menu icon at the top left, and then choose your NDI® channel: device name > source name. Click the gear icon at the bottom right. Then the web UI of your chosen device pops up in your web browser. Enter your account and password in the SIGN IN page, and configure the device after you login successfully. The default administrator account and password (case-sensitive) are as follows. Username: Admin Password: Admin

How to set the Visca UDP protocol of PTZ camera

Pro Convert device supports control of the network camera via the Visca UDP protocol, without the need to use a PTZ control line to connect the Pro Convert device to the PTZ camera. Steps are as follows: Log in to the Pro Convert Web UI. In the PTZ tab page, set the following parameters: Protocol: Visca UDP IP Address: The IP address of your camera Port: Your camera's Visca protocol network port (check the user manual of the camera or contact the manufacturer to get it) Visca UDP message header: Turn this option on if the transport protocol your camera (e.g. SONY camera) uses the Visca UDP header. Click apply to make the above configurations take effect.

How to change the advanced settings of PTZ camera

Pro Convert device supports advanced control of the PTZ camera. Step are as follows: Log in to the Pro Convert Web UI. In the PTZ tab page, set Protocol to Visca or Visca UDP. Expand Advanced Visca Parameters at the bottom of the page. Check the user manual of the camera or contact the manufacturer for detailed control parameters of the camera. Convert the values of camera parameters to decimal numbers and fill them in the corresponding parameter options. Click apply to make the above configurations take effect.